Scrap Derivatives and Financing: How the Growth of Electric Arc Metallurgy and Hedging Instruments Open Access to Structured Trade Finance for the Scrap Market. Part 1.
Scrap is becoming a strategic feedstock as EAF steelmaking surpasses 30% of global output, yet heterogeneous quality, bulk storage, and unhedged price risk have long constrained financing. This article examines how scrap derivatives and hedging instruments are opening structured trade finance to the scrap market — and what export restrictions, the EU Waste Shipment Regulation, and DRI substitution mean for collateral liquidity.


In 2025, the share of electric arc furnace (EAF) steelmaking in global steel production exceeded 30%. This data is reported by the World Steel Association (worldsteel). According to it, out of 1.8 billion tonnes of global steel production, electric arc furnaces accounted for 30.3%, and basic oxygen furnaces for 69.4%.
Since electric arc furnaces use scrap as their primary raw material, it is becoming a strategic feedstock. The Bureau of International Recycling (BIR) estimates annual scrap consumption in the global steel industry at approximately 630 million tonnes (data as of June 2026).
This volume not only provides the raw material base for the growing EAF segment but also underpins the decarbonization of the industry: according to BIR estimates, the use of scrap avoids nearly 950 million tonnes of CO₂ emissions annually.
However, despite its strategic importance, financing of the scrap market has historically been challenging for three reasons:
the commodity is heterogeneous in composition and quality;
it is difficult to assess and control on site (scrap is stored in bulk, not piece by piece);
price risk long had no instrument with which to hedge.
Why Scrap Is Becoming a Strategic Raw Material
Electric arc metallurgy is steelmaking in furnaces where the heat source is an electric arc between an electrode and scrap. Until the mid-20th century, the main method of steel production was the open-hearth process. The basic oxygen process, which today dominates steel production, began to spread only in the 1950s–60s.
The difference is fundamental:
1. A blast furnace smelts pig iron from iron ore. The converter then converts this pig iron into steel by reducing carbon content through oxygen blowing and adding a small share of scrap to the charge for cooling.
The electric arc furnace, by contrast, operates predominantly on scrap and allows flexible control of steel composition, making it the main consumer of this raw material.
According to the Bureau of International Recycling (BIR), in 2025 global consumption of recycled steel grew by 4.5% and reached 480 million tonnes. However, this figure covers only the countries and regions included in the BIR report. They account for about 75% of global steel consumption in metallurgy.
Separately, BIR provides an estimate of total global scrap consumption — about 630 million tonnes per year. This figure is derived from BIR's own calculations and worldsteel data and covers the entire global volume of scrap use in steelmaking.
China remains the largest consumer of recycled steel. In 2025, consumption grew by 8.3% and reached 227 million tonnes, despite a 4.4% decline in steel output in the country. The scrap share in steel production in China remains low — 23.6% — due to the high share of the converter method.
By region, the share of EAF steelmaking is highest, according to worldsteel:
in the Middle East — 95.5%;
in Africa — 89%;
in North America — 71.7%;
in the EU — 45.8%.
By export volumes in 2025, the top three largest suppliers are as follows:
The EU exported 16.68 million tonnes of scrap in 2025, making it the largest exporting region in the world. The main buyers are Turkey and Egypt.
US exports for 2025 amounted to 11.77 million tonnes, down 18% from 2024.
Among importers, Turkey has been in first place for many years. Its imports for 2025 amounted to 18.76 million tonnes. Turkish metallurgy is heavily dependent on electric arc furnaces, with the scrap share in steelmaking reaching 86.8%. The main suppliers are the US, the Netherlands, and the UK.
India is the world's second importer, with scrap imports in 2025 amounting to 8 million tonnes. The volume declined slightly compared to 2024 due to improved domestic scrap collection and increased use of direct reduced iron. Other large buyers are Italy, Pakistan, Vietnam, and Thailand.
However, global demand for scrap is facing a global trend toward stricter export policies. According to BigMint, as of March 2025, about 48 countries had introduced 75 different measures restricting scrap exports:
38% — partial or complete export bans;
27% — export duties;
27% — licensing requirements.
The shares in the breakdown sum to 92%. The remainder is explained by the fact that some measures relate to other types — for example, quotas or minimum price requirements. In addition, a single country may apply several measures simultaneously, and the classification in the study is not mutually exclusive.
1. China. China maintains an export duty on recycled steel raw materials at 40%. This rate has been in effect since May 2021, and it has not changed in the tariff adjustment plans for 2024, 2025, and 2026.
At the same time, on the import side, recycled steel raw materials conforming to the GB/T 39733 standard are subject to a zero duty to support imports of raw materials needed for the transition to electric arc furnaces.
Source: Announcement of the State Council Tariff Commission No. 11 for 2025 ("2026 Tariff Adjustment Plan"), which maintains the export rate on recycled steel raw materials unchanged at 40%.
2. EU, according to OECD data, formally does not apply current restrictions on ferrous scrap exports. However, from May 21, 2027, under the Waste Shipment Regulation (WSR, (EU) 2024/1157), a ban on shipments of non-hazardous waste, including ferrous scrap, to non-OECD countries enters into force. Exceptions will be countries that have demonstrated the capacity to process waste in an environmentally sound manner and are included in the Commission's list.
In September 2026, it published a draft of this list. The consultation runs until October 16, 2026, and the first list is expected by the end of the year.
According to the draft, India, Pakistan, Bangladesh, Egypt, and Morocco — the largest importers of European scrap — are excluded from the recipients. For these countries, European scrap may become unavailable from May 2027.
Turkey, as an OECD member, is not subject to the ban on shipments to non-OECD countries. Turkey accounts for about 65% of European scrap exports. For example, in 2025 (January–October), it received 8.76 million tonnes of scrap, which is more than 66% of total EU exports. This is confirmed by GMK Center calculations based on Eurostat data and a publication in Metallurgichesky Byulleten.
If the draft list is adopted in its current form, export contracts for the supply of European scrap to India, Pakistan, Bangladesh, or Egypt will lose enforceability after May 2027. Collateral formed from scrap intended for these markets will lose liquidity in its previous volume.
When assessing such collateral, the bank must verify not only current regulation but also the stage of pending measures: the draft list, the consultation date, the expected date of adoption.
In September 2026, the European Commission abandoned the planned duty on aluminum scrap, replacing it with a delegated act under the Waste Shipment Regulation. It includes a ban on shipments of waste, including aluminum scrap, to non-OECD countries.
The expected adoption of the delegated act is the end of 2026. The date of May 21, 2027, is the general date of application of the regulation, not the date of entry into force of the delegated act itself.
Against this background, direct reduced iron (DRI) is becoming important as a scrap substitute. This refers to the production of metallic iron from ore without melting. The product is used as a charge for electric arc furnaces and competes with scrap for a place in the charge mix.
At high prices or scrap shortages, plants can increase the DRI share. For the bank, this is a collateral liquidity factor: if the buyer has access to DRI, its willingness to pay a premium for scrap decreases.


