Steel Overcapacity and Trade Finance
Global steel overcapacity has reached 602 Mt and is set to grow to 721 Mt by 2027. How does this systemic surplus translate into prices, trade flows, tariff quotas and credit terms for steel traders — and what should be checked before seeking financing?


Steel is a commodity where idle capacity continues to carry fixed costs: a converter or electric furnace cannot simply be "switched off" without costs, and the decision to halt operations depends on the economics of the enterprise, contractual obligations and regional restrictions. By this assessment, overcapacity in the industry is not a temporary anomaly but a systemic condition that transforms into pressure on prices, regional imbalances and new barriers to market access.
Global steelmaking capacity exceeds demand: according to the OECD Steel Market Review 2025, excess capacity reached 602 Mt in 2024 and will rise to 721 Mt by 2027. Under the OECD methodology, excess capacity is defined as the difference between available capacity and actual steel production.
China, according to Coface's metals industry assessment, accounts for about 305 Mt of excess capacity — nearly half of the global total. Against a backdrop of record shipments in 2025, the Ministry of Commerce of the PRC announced on 12 December 2025 the introduction of export licensing for ~300 steel product lines from 1 January 2026 (Announcement of the Ministry of Commerce of the PRC No. 79).
How overcapacity translates into prices and trade flows
According to the Coface forecast, capacity utilisation in the industry remains below 75% in 2026. Capacity is not withdrawn from operation at low utilisation because of high fixed costs of maintaining the units, social and regional restrictions on plant closures, and expectations of state support.
Exports become the main channel for disposing of surpluses: finished steel shipments from China reached a record 119 Mt in 2025 (+7.5% y/y) according to PRC customs data for 2025. Growth destinations shifted towards the Middle East and North Africa (MENA — Middle East and North Africa), which took first place among destinations with a 31% share, ahead of Southeast Asia (29%). Within the regions, Saudi Arabia (+18.4% y/y), Thailand (+11.9%), the Philippines (+11.7%) and Pakistan (+31.4%) lead; shipments to Vietnam and South Korea declined amid anti-dumping measures.
Regional price divergence is widening: according to Coface's metals industry assessment, forecast average prices for 2026 are about USD 500 per tonne in Asia, USD 700 in Europe and USD 1,150 in North America. Protectionist measures support higher prices in protected markets, limiting arbitrage.
China's position is set out in official communications as a measure to streamline exports and provide statistical control. The China Iron and Steel Association describes licensing as a tool for maintaining the balance of global supply and demand, according to a statement by the China Iron and Steel Association.
Trade measures as a risk to an individual transaction
From 1 July 2026, the European Union applies Regulation (EU) 2026/1384, including Article 2: tariff quotas are reduced to 18,345,922 tonnes per year, the over-quota duty is 50% of the value of the goods across 26 product categories. Quotas apply within an annual period from 1 July to 30 June and are administered quarterly; in the first year of application, unused quarterly balances are carried over to the next quarter. From 1 October 2026, the importer must provide verifiable evidence of the country of melting and pouring, in accordance with Article 4(1) of Regulation (EU) 2026/1384; the form of evidence is set by Implementing Regulation (EU) 2026/1963 of 28 August 2026.
The United States has applied an additional 50% duty under Section 232 to steel, aluminium and their components in finished goods since 4 June 2025; from 6 April 2026, the regime for certain derivative products was restructured: under the US presidential proclamation of 2 April 2026, the rate for many derivative products was reduced from 50% to 25%, the calculation base became the full value of the goods, and goods with a metal content of less than 15% were removed from the duty. The measure is introduced through the Federal Register and the Customs and Border Protection Service.
India introduced a provisional safeguard duty of 12% on flat-rolled products (codes 7208–7212, 7225, 7226) from 21 April 2025; from 30 December 2025, by notification of the Indian Ministry of Finance on the final safeguard duty, the measure became final for three years. The provisional duty expired on 7 November 2025, and the final one was introduced on 30 December 2025; imports between these dates were not subject to the safeguard duty. The rates of 12%, 11.5% and 11% correspond to the recommendations of the Directorate General of Trade Remedies (DGTR) and are subject to verification against the text of the notification. Brazil in 2025–2026 applies a regime of import permits and quotas for certain types of steel products, restricting access to the market without prior authorisation.
A duty introduced during transportation changes the economics of the transaction retroactively: the delivery term (FOB, CFR, CIF) fixes the point at which risk and costs pass, but does not protect against a change in the customs regime in the destination country. Cargo arriving after the quota is exhausted is subject to the over-quota duty — in the EU this is 50% instead of the zero rate within the quota, which turns a transaction with minimal profit into a loss-making one.
Provisional measures may affect goods already imported if the applicable act expressly provides for such an order. In the EU, when the quarterly quota is exhausted, cargo registered after the date of exhaustion automatically falls under the over-quota duty, regardless of the shipment date.
The allocation of the duty under the contract depends on the basis terms and clauses: under FOB, CFR and CIF, the import duty is generally paid by the buyer-importer; under DDP, the seller assumes it. Contractual clauses such as "duty for the buyer's account" or "a tariff change above X% revises the price" lock in the risk, but require explicit agreement and documentary confirmation of the fact that the measure applies.
How this is reflected in credit terms
The credit profile of the industry remains under pressure: according to S&P's industry risk assessment in metals, industry risk for steel is assessed as "moderately high", noting weak profitability and volatility of price spreads in 2025–2026. Coface classifies risk in metals as "high" or "very high" depending on the region: "very high" for the Middle East and Turkey, as well as Western Europe; "high" for the Asia-Pacific region, Central and Eastern Europe and Latin America; North America is classified as medium risk.
The sector limit and the destination country limit may be tightened as flows shift to regions with higher country risk. Banks may impose restrictions on concentration of exposures in individual jurisdictions and commodity groups, especially when working with semi-finished products and flat-rolled products. It is impossible to assert specific changes to such limits for steel traders in 2025–2026 without sources; the procedure is described as a general risk management mechanism.
The value of collateral depends on the destination region and applicable measures: the same lot of hot-rolled coil in the EU within the quota and after its exhaustion has a different price of possible sale. Banks apply a discount to the collateral value reflecting the risk of the duty being applied, the quota being exhausted or delay at customs; the base for calculating the borrowing may not change, but the available financing volume is reduced.
Transaction requirements may be tightened: pre-sold cargo, a letter of credit or its confirmation, and an analysis of applicable trade measures before financing are usually considered conditions for new transactions at this risk profile. Credit analysts check the product composition by commodity nomenclature codes, the presence of anti-dumping and safeguard measures in force, and the requirements for evidence of the country of melting.
Trade credit insurance may respond to industry risk by revising limits on buyers in metals. Details of changes in trade credit insurance restrictions are provided in the material on insurance limits amid rising metal prices.
Steel Overcapacity and Trade Finance

Critical Minerals in 2026: Geopolitics, Resource Strategy, and Supply Chain Financing
Critical minerals in 2026 face a perfect storm of soaring demand, geopolitical fragmentation, and chronic underinvestment. This analysis covers supply chain risks, financing instruments (PXF, RCF, Inventory Finance, ESG-linked loans), and a CFO checklist for resilience in the lithium, cobalt, nickel, and REE markets.

Business Recovery Trends: Predictive Analytics and Factoring Industry Tools in 2026
Tightening bank lending standards and a growing gap between accounting profit and real cash flow are pushing even profitable companies toward cash crises. This article examines how factoring in 2026 has evolved from a pure financing tool into an early-warning diagnostic system — using payment discipline data, non-recourse structures, and reverse factoring (SCF) to detect stress 3-6 months ahead, clean up balance sheets without adding debt, and protect supply chains.

Border Carbon Mechanism and Metals: Who Pays?
From 1 January 2026, the EU Carbon Border Adjustment Mechanism (CBAM) operates in its definitive regime under Regulation (EU) 2023/956: for embedded emissions in imported iron, steel and aluminium, the authorised declarant must report and surrender certificates. This material examines who bears the legal and economic burden, how the mechanism affects pricing, documentation and trade finance terms for metals, and what remains undecided.
Metal origin and circumvention of measures
Confirmation of origin becomes a condition of financing: from 1 October 2026, the EU requires the country of melting and pouring to be indicated under Article 4(1) of Regulation (EU) 2026/1384. The main evidence is a mill test certificate indicating the country of melting and pouring and the heat number; if the certificate is absent, until 30 September 2027 customs authorities may accept separate alternative documents containing the country of melting and pouring and the heat number, and after that date the list of acceptable standalone evidence narrows (Implementing Regulation (EU) 2026/1963).
Circumvention investigations are conducted in relation to specific commodity flows and countries. In 2025–2026, the EU conducted circumvention investigations regarding stainless steel and flat-rolled products, including supplies linked to Indonesia and Turkey; in the stainless steel cases, Indonesia acted as the producing country against which its own measures were applied, not as a transit country. The relevant EU implementing regulations are Regulation (EU) 2025/1234 and Regulation (EU) 2026/567. The consequences for the importer are additional assessment of duty on an already imported lot, detention of the cargo and a possible claim against the supplier; for a lot in transit — refusal of release or recalculation at a higher rate.
The risk for the bank is financing a transaction with unreliable documents on origin: customs sanctions, seizure of goods and reputational loss from participation in circumvention schemes. The bank may request a mill test certificate with the heat number, a supplier's declaration of the country of melting and pouring, and, when working with the EU, verification of compliance with the TARIC code and the presence of measures in force by country of origin.
How traders restructure transactions
Contractual clauses become the first means of protection: traders include duty change clauses allowing the price to be revised if a tariff is introduced or raised after the date of signing the contract. Long-term contracts stipulate the right to terminate or suspend shipment if the quota is exhausted or a provisional measure is introduced in the destination country.
The choice of delivery terms is determined by who bears the duty risk: under DDP, the seller assumes all customs payments, including the over-quota duty, which makes it exposed to changes in the tariff regime. Under FOB or CFR, the buyer handles import clearance and pays the duty independently, but the bank may require confirmation of the buyer's solvency and the availability of a letter of credit.
Monitoring quotas and planning shipments become ongoing work: traders track the EU's quarterly limits by product category and plan shipments so that cargo registration does not fall in the period after the quota is exhausted. The shift of flows towards regions without quotas (the Middle East and North Africa, certain Asian countries) is accompanied by verification of measures in force in each new country.
The form of settlement may be tightened: when working with buyers from countries with high country risk, the bank may require a letter of credit confirmed by a first-tier bank. Counterparties require confirmation from an international bank to reduce the risk of non-performance of obligations and payment delays.
Insurance and protection against price fluctuations are considered as additional means: details of changes in trade credit insurance restrictions are provided in the material on insurance limits amid rising metal prices, and issues of protection against price risk — in the material on hedging steel prices.
The set of origin documents becomes part of the transaction: a mill test certificate with the heat number, a supplier's declaration of the country of melting and pouring, verification of the TARIC code and confirmation of the absence of measures in force against circumvention. Without such a set, the bank may refuse financing or apply an increased discount to the collateral value.
| Comparative analysis of delivery scenarios | Delivery without trade measures in force | Delivery to a country with a tariff quota and over-quota duty | Delivery subject to an anti-dumping or countervailing duty | Delivery to a new market with high country risk |
|---|---|---|---|---|
| Main risk for the financier | Price risk and buyer solvency | Risk of quota exhaustion and application of the increased duty | Risk of retrospective assessment of duty on imported goods | Country risk, currency restrictions, payment delays |
| What the bank checks | Buyer's credit profile, payment history | Quota status, TARIC code (EU Common Customs Tariff), country of origin | Presence of measures in force, product perimeter, duty rate | Country limits, availability of a letter of credit, confirmation |
| Typical form of settlement | Open account, documentary collection, letter of credit at choice | Letter of credit or documentary collection with a duty clause | Confirmed letter of credit, partial prepayment | Confirmed letter of credit, prepayment, guarantees |
| Impact on collateral value | Discount reflects the volatility of the goods price | Discount increases for the over-quota duty risk | Discount accounts for the potential additional assessment of duty | Discount increased due to country and currency risk |
| How the risk is reduced | Buyer diversification, receivables insurance | Quota monitoring, duty change clauses in the contract | Preliminary analysis of measures, reserving for the duty | Confirmed letter of credit, insurance limits, guarantees |
Conclusions
Before applying for financing, the trader must prepare an analysis of trade measures: check tariff quotas in force, anti-dumping and countervailing duties by TARIC/HS code (TARIC — EU Common Customs Tariff; HS — Harmonized System of description and coding of goods), requirements for evidence of the country of melting and the status of circumvention investigations.
Contractual terms that reduce risk for the bank include duty change clauses, the right to revise the price or terminate if the quota is exhausted, and the choice of a delivery basis that explicitly allocates customs payments between the parties.
The shift of supply destinations to regions with high country risk may lead to a tightening of the form of settlement (confirmed letter of credit, guarantees) and higher collateral requirements, including a discount to the collateral value.
The material does not assess countries' trade policies, does not forecast steel prices or the decisions of authorities investigating trade measures, and is not legal advice or a recommendation on structuring specific transactions.
Frequently asked questions
Why may a bank tighten terms for a steel trader if the buyer is reliable?
Buyer reliability is only one component of risk: the bank also assesses country risk, applicable trade measures and the volatility of the collateral value. When delivering to a jurisdiction with a tariff quota or anti-dumping duty, the bank may factor in the risk of additional tariff assessment, which increases the discount to the collateral value even with a strong buyer.
What happens to a financed lot if the quota is exhausted before the cargo arrives?
Cargo registered after the quota is exhausted is subject to the over-quota duty — in the EU this is 50% instead of the zero rate within the quota. The economics of the transaction change retroactively: the margin may become negative, and the bank may require additional collateral or a revision of the financing terms.
How does the bank verify the origin of steel in a transaction?
The bank may request a mill test certificate indicating the country of melting and pouring and the heat number, a supplier's declaration of origin and verification of the TARIC code for measures in force. When working with the EU, from 1 October 2026 these documents become mandatory for indicating the country of melting and pouring.


